江门市力士达泵业制造有限公司
地址:江门市江海区滘头明星村工业区内
电话:(86)-0750-3812633
传真:(86)-0750-3813833
邮箱: lishida@lishidapump.com
网址:www.lsdpump.com
手机: 13924686160(张生)
▼特 点/Characteristics:
●符合IEC34-1标准,带有全封闭鼠笼转子,油冷式结构。
Conforms to the IEC34-1 standard, has the completely closed squirrel cage rotor, the oil cold type structure.
●6英寸NEMA即美国电气制造商协会标准法兰接头连接。
6-inch NEMA-the American Electrical Manufacturers Association standard flange Connector connection.
●使用SKF推力轴承、FAG向心轴承,能承受更大轴向负载。
The use of SKF thrust bearings, the Y-centripetal bearings, can withstand a larger axial load.
●不锈钢机壳、转子轴。˙轴向压力:15.500N。
Stainless steel casing, rotor shaft. ˙ axial pressure: 15.500N.
●带有防砂套、压力平衡器用改性丁腈橡胶性能。
With sand control sleeve, pressure balance for the performance of modified NBR.
●功率:三相:3kw-15kw
Power: Three-phase: 3kw-15kw
●电压:三相:380V(±5%) 50HZ。
Voltage: Three-phase: 380V (±5%) 50HZ.
●保护装置的等级:IP58。
Grade of protective device: IP58.
●绝缘等级:C I B。
Insulation Grade: C I B.
●MAX高耐温:摄氏35度。
Maximum temperature: 35 degrees Celsius.
●所需流经电机的MAX少水流:16cm/秒。
The minimum flow of water required to flow through the motor: 16cm/seconds.
●水的PH值要求:6.5-8.0。
Water PH Requirements: 6.5-8.0.
●每小时MAX多启动次数:20次。
Maximum boot times per hour: 20 times.
●可垂直或水平安装。
Can be installed vertically or horizontally.
▼使用说明/Operation Instructions:
▼性能曲线/Performance Curves: