分类列表
水泵电机6
  • 水泵电机6
  • 在线询价
    详细内容


    水泵电机


    ▼特 点/Characteristics:

    ●符合IEC34-1标准,带有全封闭鼠笼转子,油冷式结构。

    Conforms to the IEC34-1 standard, has the completely closed squirrel cage rotor, the oil cold type structure.


    ●6英寸NEMA即美国电气制造商协会标准法兰接头连接。

    6-inch NEMA-the American Electrical Manufacturers Association standard flange Connector connection.


    ●使用SKF推力轴承、FAG向心轴承,能承受更大轴向负载。

    The use of SKF thrust bearings, the Y-centripetal bearings, can withstand a larger axial load.


    ●不锈钢机壳、转子轴。˙轴向压力:15.500N。

    Stainless steel casing, rotor shaft. ˙ axial pressure: 15.500N.


    ●带有防砂套、压力平衡器用改性丁腈橡胶性能。

    With sand control sleeve, pressure balance for the performance of modified NBR.


    ●功率:三相:3kw-15kw

    Power: Three-phase: 3kw-15kw


    ●电压:三相:380V(±5%) 50HZ。

    Voltage: Three-phase: 380V (±5%) 50HZ.


    ●保护装置的等级:IP58。

    Grade of protective device: IP58.


    ●绝缘等级:C I B。

    Insulation Grade: C I B.


    ●MAX高耐温:摄氏35度。

    Maximum temperature: 35 degrees Celsius.


    ●所需流经电机的MAX少水流:16cm/秒。

    The minimum flow of water required to flow through the motor: 16cm/seconds.


    ●水的PH值要求:6.5-8.0。

    Water PH Requirements: 6.5-8.0.


    ●每小时MAX多启动次数:20次。

    Maximum boot times per hour: 20 times.


    ●可垂直或水平安装。

    Can be installed vertically or horizontally.


    ▼使用说明/Operation Instructions:


    水泵安装示意图


    ▼性能曲线/Performance Curves:




    上一篇:水泵电机4
    下一篇:单相启动盒

    分享到